A pair of Back Box Savers, installed on each of the two back box lugs, allow the faceplate to be raised, lowered or tilted by plus or minus 5mm. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data. The current solution — replacing the back box just because of a stripped lug — is time-consuming and costly, especially if the wall is re-decorated. The threads in the lugs securing the socket or switch to the back box can strip, meaning the socket cannot be firmly fitted. I believed there must be a way to repair or replace the faulty back box without damaging the wall, a solution that could save electricians time and money.

You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network. Back Box Saver allows the back box still to be used, by overlaying a reinforced nut onto the stripped lug to provide a secure fixing for the screw to engage. New to the market, a simple product designed to replace a broken lug OR thread to the inside of a metal back box.

If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. If you're looking for the latest news and updates about electrical4less, then this blog section is the perfect place to stay in the loop! Back Box Saver allows the back box still to be used, by overlaying a reinforced nut onto the stripped lug to provide a secure fixing for the screw to engage. I recently undertook an EICR at a property where I removed a socket front in the kitchen and, in doing so, discovered the threaded lug at the side of the metal back box had sheared off.

Until now the only proper solution was to suffer the time and expense of re-installing the back box.

We set our apprentices the task of lashing some wire to the clip and tied it to a heavy chair to see if it was able to take the load.

The smaller REBBAL lug can be used on any depth of back box from 25mm up wards, just requiring the correct length 3. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others.GDPR that your data is transferred to the US, whose legislation has been considered as not providing an adequate level of personal data protection and where your personal data could be processed by public authorities. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item.

A pair of Back Box Savers for faceplate raise, tilt or lower saves the installer the time and trouble of replacing the back box. Our goal is to provide one stop place for electricians and electrical contractors, but we are happy to help other clients too. As an electrician and business owner, I grew frustrated with the process of arriving on site for second fix and finding back box lugs damaged or missing. After removing all snags from the inside of the back box, the clip simply pushes on with ease, and due to the tensioning and calibration of the clip, it will remain firmly and securely in place. Quick and easy solution thanks to the Back Box Repair Clip this is a great solution designed to replace broken lugs or thread on the inside of a metal back box.As any electrician will know, the process of changing the back box and making good – sometimes involving other trades – will turn a five-minute job into a few hours, at least. Add to quote” – this option allows to you gather items together and ask us for a no obligation quote. It has been designed for use on metal back boxes from 25mm deep upwards, though you may need longer 3.