Original Innokin Endura T20-S electronic cigarette kit with Prism T20S MTL tank 1500mAh battery box mod Endura T20 S vape pen (Gray)

Product Information

Yes, you are correct that this is an MTL device and not a ‘true sub ohm device’. There is a little confusion coming in with sub ohm coils in e cigs such as the T20. I have also tried the tank on another mod on its own to see how the tank performs. 0.8 ohm Prism S Coil

If you shop around you can get 6mg 80% VG E-liquid I have a few different brands with this strength. My favourite is the Stika Bombz fruit salad which comes in 10ml bottles and 6mg strength. Sadly due to the TPD regulations any bottles bigger than 10ml will be usually 0% nicotine. I tend to stay away from these myself.Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. The 1500mAh internal battery gives you a consistent 18W of power, and features passthrough technology to allow you to vape while charging alongside a range of integrated safety features. A three-colour LED lets you keep an eye on your remaining battery life; when you need to recharge, you can use the Micro USB cable included in the kit and the LED will display your charging status. Well so far after around 4-5 hours of me using this there is no drop in performance and the battery indicator light is still green – which means it is still above half charge.

When you run low on juice the top fill system makes refilling easy, just unscrew the top cap and pour your liquid in the gap around the coil. The 0.8 Ohm coils are a good balance between a higher resistance and Sub Ohm, giving both flavour and vapour production without being too intense for new Sub Ohm vapers. Never charge your battery at a higher amp than what is indicated by the manufacturer. To calculate the maximum amp level to charge your battery: Obviously coils can be bought separately but even so I don’t think an extra coil would have shrunk the bottom line too much – more on the coils later. The Endura Prism T20S tank is also available as a separate item for use on other batteries or vape mods. For deliveries to the Scottish Highlands, Scottish Islands, Northern Ireland, Isle of Man, Scilly Isles, Isle of Wight & Jersey, please allow 2 to 5 days. Saturday and Sunday delivery is also not available in the areas listed abovePrevious Endura Models have lots of fans who use them to stop smoking and this is a wonderful update to the range. The Endura T20 S now has a 1500mAh Internal Li-Po battery. Meaning you can vape all day without worrying about your battery going flat. Secondly you can monitor your battery charge by looking at the colour of the fire button green for full, Yellow is half and red is low. When it is time to charge, this battery has integrated protection meaning you can charge and vape safely. OK…. I used a 50-50 VG and PG tobacco e-liquid – Innokin says the Prism coils can handle higher VG ratio. Hope that helps in the meantime, anything else that comes to mind you want to clarify please ask away. For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

After 6 hours of only using this device and no ciggies it has just gone down to half charge (orange light) – which is excellent really for a higher powered coil. Once I’d completely emptied the batteries they took between 90minutes and 2 hours to fully charge and as I’ve said I got a decent 2 days and slightly under a day’s vaping.

Design and Build Quality

After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance. The Innokin company is a well-known brand and they have so far produced various reliable vape products. One of their most popular productions is the Innokin Endura kits, there has been a various version of this kits and this brings us to ask you the question- have you heard about the Innokin Endura T20 Kit before? Do you know how many versions are in the Innokin Endura kits production line? Hang in there! In this article, we shall let you know the different productions present in the Innokin Endura line and a detailed review and instruction of the Innokin Endura T20 kit. 1. What is Innokin? Another tip is to remove the drip tip when installing a coil – this makes sure that the coil is fully inserted into the tank when you secure it. Flavour & Cloud Production Estimated delivery time is between 3 and 5 days. This is not guaranteed. Please allow up to 10 days

My friend owns just the T18 tank on its own and uses it on a mod. So for those who want to just buy the tank on its own – I put this tank on my Eleaf Pico to test its performance. An outer sleeve complete with the usual warnings and a diagram of contents is slid off to reveal a sturdy lift up box. If you're after a simple device that delivers discreet vapour production, improved flavour and a compact design then the Innokin Endura T20S kit is for you. INNOKIN ENDURA T20S SPECS Simple battery charging- connect the small end of the supplied USB cable to the side of the battery and the larger end to a USB outlet port. The light on the button goes out when it is fully charged. In The Hand

Slim and compact device ideal for hassle free vapers delivering up to 18W of power for a more restrictive draw, similar to smoking traditional cigarettes. The pen also features Innokin’s innovative ‘Vape While Charging’ technology and integrated protection against overheating, short circuit and over-discharge. Really simple operation, press the fire button to vape – no other settings or adjustments to contend with. I tend to puff on an MTL vape much like a pipe – almost but not quite chain vaping – and found I had to work a bit harder to get a good lungful.